19
HANDSET
VIEWING REGISTER
ENTRIES
TALK MODE
(AUTOTALK)
During an external call you can transfer the call to an-
other subscriber if that subscriber is served by the same
PBX. To make the transfer, press the [
F/R
]
key
. The base
set will signal either EARTH or FLASH on the telephone
line (see earth / flash time programming).
Note that the PBX must support this feature.
When the handset rings, it changes from ”Battery Char-
ger Off” mode to ”Talk” mode. When the ”Talk” mode
is disabled the handset changes from ”Battery Charger
On” mode into ”Stand-by” mode.
In ”Talk” mode the
call key
[ ] is not available for 4
sec if the key is pressed by accident.
• This message is displayed
when the battery is nea-
ring depletion.
• A warning beep is heard
and the battery icon
is displayed.
This display indicates that all keys of the handset are
locked. Only incoming calls are allowed.
• If you want to lock the
handset, press the
ON
key
[ ] briefly
(max. 0.5 sec).
• To clear the lock, press
the
ON key
[ ] again.
BATTERY LOW
HANDSET LOCK
Multi i
LOCK
