Call Active
The handset changes to Call Active mode if you press
the
call key
[ ] or [
INT
] to make a call.
Programming
The Programming mode is enabled if you want to
change settings. Press the [
F/R
]
key
to enable the pro-
gramming mode.
• You can switch on
and off the handset with
the
ON
[ ]
key
.
• When you switch on, the
handset ( PP ) tries to
find a base set ( FP ).
• When the base set is
found, a beep is heard.
The antenna icon and
the base set number
are displayed on the
LCD.
Note:
If the handset
has not registered,
”NOT Sub” is displayed
on the LCD. You must
register the handset at
first (see page 32/33
”Registering a handset”).
This message is displayed when the handset is moving
out of the radio range of the base set.
• You hear a warning
beep. Take the handset
back within the range
of the base set.
18
HANDSET
SWITCHING ON
THE HANDSET
Searching FP
MULTi 1
Range out
HANDSET OUT OF
BASE SET RANGE
NOT SUB
