32
You can make and answer calls with a handset only after
it has registered with the base. To register a handset, the
base must be in ”Register” mode. If you want to register
a new handset, press the page button [P] on the base set
for more than 15 seconds until a beep comes. This signals
that the base has been reset and entered the ”Register”
mode.
• ”NOT SUb” or ”SEAR-
CHING FP” is displayed
on the LCD.
• Press the [
F/R
]
key
to
display ”H-Register”.
• Now press the [ ]
key
.
• ”SEARCH bS 1” is dis-
played on the LCD.
Not Sub
HANDSET SETTINGS
KEY CLICK ON / OFF
You can configure the handset such that each press of a
key is confirmed with an audible signal.
• Stand-by mode
• Press the [
F/R
]
key
to
display ”H-KEY CLICK”
on the LCD.
• Now press the [ ]
key
.
• The current setting is
displayed.
• Press the [
F/R
]
key
to
select the required setting.
• Press the [ ]
key
to
confirm the setting.
• The program returns to
the ”H-KEY CLICK” menu.
h--key click
click on
h--key click
multi i
REGISTERING
A HANDSET
h--register
search bs i
