SINOPE
USER MANUAL
p.23
3.11 Battery
The bicycle provides pedaling assistance by means of an electric
motor powered by the battery placed in the down tube of the frame
structure (Figure 6)
3.11.1 Battery charge status
You can view the battery charge status directly on the assistance
system management display.
In the event that the battery is disassembled from the vehicle or you
want to see the state of charge without turning on the assistance
system, at the bottom of the battery there is a button (Ref. I - Figure
6) that allows, through 5 LED lights (Ref. L - Figure 6), to display the
charge status.
FIG. 6
3.11.2 Battery removal/installation
1- To remove the battery, make sure the assistance system is turned off and do the following:
2- Insert the battery lock/unlock key into the appropriate lock at the top left of the frame, near the handlebar and turn the
keys counterclockwise (Ref.M - Figure 7);
3- Holding the key rotated, unhook the battery and lift it (Ref.2 - Figure 7). 3- Take out the battery completely taking care
not to bump into the frame.
FIG. 7
1
2
3
