SINOPE
USER MANUAL
p.25
3.11.3 Battery charging
Charging the battery of the pedal-assisted bicycle can only be done by removing the battery .
To charge the battery proceed as follows:
1. Turn off the assistance system of the pedal-assisted bicycle using the appropriate "MODE" button (Ref. H in Figure
2. Remove the battery;
3. Connect the supplied battery charger to the socket with the appropriate plug, at the bottom of the battery;
4. Connect the battery charger to a power outlet (230 V / 50 Hz) and charge the battery for as long as necessary.
ATTENTION
CHARGER
Always connect the plug to the bat-
tery first and then the battery charg-
er to the power outlet.
FIG. 9
3.11.4 Troubleshooting
ATTENTION
TROUBLESHOOTING
In the event that the assistance system does
not activate even if the battery is charged,
contact your authorized dealer.
PROBLEM
CAUSE/SOLUTION
The system does not turn on
Check that the battery is charged.
PROBLEM
CAUSE/SOLUTION
The assistance is not activated
Check that the battery charge level is
sufficient.