manualshive.com logo in svg

MBM LA RUE 28, Руководство пользователя

Поделиться
Скачать
MBM LA RUE 28 Скачать руководство пользователя страница 29

LA RUE

 USER MANUAL

p.29

8.4 Monthly maintenance and checks

8.4.1  Control of electrical circuits and components

Check the condition and fixing of the battery cables: the sheaths of the electrical cables must be in good condition and the 
terminals must be tight, not corroded and if necessary, covered with protective grease and specific insulation.
Check that all light bulbs and lights have been switched on correctly.

8.4.2  Control and adjustment of the rear derailleur

Adjustment of the lower and upper limit switches of the gearbox: Turn the two screws (Ref. V-Z - Figure 19) so that the chain 
does not come out. The chain displacement device will have to be in line with both the larger and smaller gear. (Ref. Figure 20)

To prevent damage to the gearbox, it is recommended not to exert too much 
pressure on the pedals while changing gear. So, avoid changing when
you make an effort or drive on a slope.

Adjust the voltage of the cable by acting on the appropriate control to ensure
the immediate response of the rear derailleur to the control of the handlebar. 
(Ref. Figure 21)

Lower limit adjustment

Upper limit adjustment

FIG. 19

FIG. 20

FIG. 21

Содержание LA RUE 28



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды