LA RUE
USER MANUAL
p.12
3.5.2 Service levels
To know the exact intensity of assistance, based on the se-
lected value, see below.
3.6 Activate support
The assistance system is controlled by the controller on
the handlebar. In particular, the assistance is activated or de-
activated using the on/off button (Ref. M - Figure 6). Once
the system is activated, the management display itself is
switched on (Ref. I - Figure 6), through which it is possible to
see the activity status of the middle.
The power of the engine depends on the number of pedal
strokes per minute, according to a multiplicative factor ac-
cording to the selected level of assistance (Ref. 1 - Figure 6).
The assistance drops linearly until it reaches 25 km/h. Once
this speed is exceeded, the assistance is automatically de-
activated.
LEVEL 0 - NOTHING ASSISTANCE
LEVEL 2 - ASSISTANCE 15%
RECOMMENDED ROUTE: PLAIN - LONG DISTANCES
LEVEL 2 - ASSISTANCE 25%
RECOMMENDED ROUTE: PLAIN/HILLY - MEDIUM-LONG DISTANCES
LEVEL 3 - ASSISTANCE 50%
RECOMMENDED ROUTE: HILLY /MEDIUM CLIMB - MEDIUM DISTANCES
LEVEL 4 - ASSISTANCE 75%
PATH ADVISED: CLIMB - RUNS MEDIUM COURT
LEVEL 5 – ASSISTANCE 100%
RECOMMENDED ROUTE: CHALLENGING CLIMB - SHORT DISTANCE
3.5 Assistance system
3.5.1 Commands
To manage the assistance system there is a controller on the left side of the handlebar. This device allows you to vary the
level of assistance of the system and to view information about the status of the battery.
L -
THE BUTTON ALLOWS YOU TO INCREASE THE LEVEL OF ASSIS-
TANCE. A LONG PRESS ALLOWS YOU TO TURN ON THE FRONT AND
REAR LIGHTS IF POWERED BY THE E-BIKE BATTERY.
M -
PRESS AND HOLD TO TURN ON/OFF THE ASSISTANCE SYSTEM.
N -
THE BUTTON ALLOWS YOU TO DECREASE THE LEVEL OF AS-
SISTANCE.
A LONG PRESS ALLOWS YOU TO ACTIVATE THE WALK MODE.
I –
THE DISPLAY ALLOWS YOU TO VIEW THE FOLLOWING INFOR-
MATION:
1-
Level of assistance provided by the engine.
2-
Battery status.
3-
Turning lights on/off.
FIG. 6