LA RUE
USER MANUAL
p.28
8.3.2 Lubrication and chain tension control
It is important to periodically clean and lubricate the chain to avoid corrosion due to atmospheric agents.
1. Wipe the entire length of the meshes with a rag.
2. Spray on all meshes a special grease in spray for transmission chains.
CORRECT CHAIN LUBRICATION
Be extremely careful not to let go
the lubricant on the brakes or tires of the
bicycle. This can lead to the occurrence of
serious injuries!
DANGER
Check the correct tension of the chain by placing the gear-
box in the two different extreme positions allowed by the
sprocket pack.
8.3 Maintenance and weekly
8.3.1 Washing and cleaning
The cleaning of the pedal-assisted bicycle is not only a matter of decorum, but also allows you to immediately detect a
possible defect in the same.
In order not to damage or compromise the operation of the various components, especially the electrical parts, cleaning
must be carried out taking some precautions. It is absolutely forbidden to direct jets of pressurized water towards the
electrical parts, the motor and the battery, for which sponge washing is recommended.
Before starting the pedal-assisted bicycle, dry completely with low-pressure compressed air and check that there is
no residual moisture left on the electrical components
.
8.3.3 Frame and bolt control
The load-bearing frame of the pedal-assisted bicycle and the welds must be free of visible defects such as: cracks, defor-
mations, incisions, corrosions, etc.
Make sure all the bolts of the pedal-assisted bicycle are tightly tightened.
