53
7. In the MPLAB IDE window, select
Programmer
, then
Select Programmer
, and
PICkit 3
.
8. When the window shown below appears, click
OK
. (This step will be skipped for subsequent
times of use.)
8. In the MPLAB IDE window, select
File
and then
Import
to specify the HEX file to be written.
9. In the MPLAB IDE window, select
Programmer
and then
Program
to execute the writing process.
When
Programming/Verify complete
is displayed, the writing process is finished.
10. The product will beep and the version number will be displayed for about three seconds.
Then the touchpad adjustment will automatically start. After the automatic adjustment is finished,
re-enter the values noted earlier.
