CORONA LINE
16
6.2 Wiring a system consisting of a CD Player, Preamplifier and Stereo Power Amplifier
Your CD player as well as the preamplifier and the stereo power amplifier can be connected either using single-ended
cables with Cinch/RCA plugs (asymmetrical or “single-ended” connection), or with cable using XLR plugs (symmetrical or
“balanced” connection). Any connection methods may be combined. For both connections we recommend that you use
a high quality single-ended cable with Cinch/RCA plugs.
NOTE:
The connection between the preamplifier and the stereo power amplifier should consist of either cables with
Cinch/RCA plugs or of cables with XLR plugs but NOT of both types together simultaneously. Connections consisting of
both types of cable lead to interference and impairment of sound quality.
You will need:
•
2 pairs of audio interconnect cables, Cinch/RCA termination
•
2 UTP-CAT 6 cables
•
2 loudspeaker cables
6.2.1 Wiring the CD Player with the Preamplifier
Take the pair of Cinch/RCA cables and connect the “source” end securely to the CD player in the pair of sockets labelled
“RCA” in the “Output” group of connections. If the cable features a drawing of a signal direction arrow, secure the cable
end in the socket of the CD player whose arrow is pointing away from the CD player.
Secure the other end of the pair of cables in the sockets on the preamplifier labelled “CD 1” or whichever input you desire.
Please ensure that the same channels are connected together in the two devices (right to right; left to left).
mbl C31 CD Player
mbl C11 Preamplifier
