MB 700 H Series, Руководство по эксплуатации

Страница: 41 / 68

41
4
MODBUS
Register
MODBUS register
address is provided for
external device or
SCADA to read value of
the parameter. Selected parameter attribute
value is provided as 32 bits
float registers.
This field in not editable.
Table-4.12: MyPage parameters configuration
4.13 User Configuration
Following types of users can be configured for soiling station operation:
i)
Administrator
ii) Operator
iii) Viewer
Left click on menu option ‘User Configuration’ to configure users shown in figure-
6.16 below. Only ‘Administrator’ can configure usernames and their passwords.
Figure-4.13: User configuration.
Use tabs provided to configure the required user.
Configuration details of user configuration are provided in table 4.13 below.
Sr. No Parameter Description Remarks
1 Username Set username Users with configured
username and passwords will be
allowed to operate the
datalogger
2 User Password Set user password
Table-4.13: User configuration
4.14 Commit Configuration
All edited parameter values must be saved in the soiling station non-volatile memory
– this is called ‘Commit Operation’. This will be allowed only if configuration of any
parameter has been edited (marked by ‘
E
’).