7
For additional technical information
, go to the “SUPPORT” tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
PREPARATION
CHAPTER 2
– PREPARE YOUR KICK PANEL COMPRESSION HORNS
NOTE - Do not proceed with CHAPTER 3 until you have properly prepared the
speakers with their compression diaphragm covers. Refer to the manual called
MBQ-POD. You can also find this manual on-line by searching the model number.
Shown in FIG 2-1 is one picture from the MBQ-POD manual which will guide you step-by-step
through preparing the kick panel compression horn speakers for installation into the kick panel
enclosure and the RZR.
(FIG 2-1)
Removing the large back plate and installing the special compression horn diaphragm covers
dramatically reduces the depth of the compression horns which ultimately allows our overall kick
panel enclosure to be shallower than you would think. This assures maximum leg room for
driver and passenger in the vehicle.
