14
For additional technical information
, go to the “SUPPORT” tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
STEP 3
– Complete the connection at the busbar as shown in FIG 6-4. Mount the audio harness
first, with the OEM RZR connections on top. This allows you to use the red boot on the
powerline, keeping your install clean and looking factory installed.
(FIG 6-4)
Zip-tie this power portion of the harness into place. Assure that no added wiring is near any
moving parts or components that generate large amounts of heat.
SECURE THE RED
BOOT ON THE POWER WIRE