6
For additional technical information
, go to the “SUPPORT” tab at MBQUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
CHAPTER 1
– PREPARATION FOR INSTALLATION
Before you start dismantling your machine, we suggest you prepare all your components,
enclosures and harnesses.
These steps will follow the CHAPTERS of the Installation Videos when completed. Additionally,
it will make life less stressful to have everything ready when you are ready to put each
component into the machine.
STEP 1
– CONFIRMING POWER TO BUS BAR
The Polaris RZR and our Tuned Audio System requires a harness that connects the battery
under the seat to the busbar harness that is located under the hood.
The harness is shown in FIG 1-1. Check that your machine has this harness installed. If not, you
can purchase from your dealer or Polaris online. The part numbers are 2881551 or 2881646
depending on which machine you own.
(FIG 1-1)
