MB Connect Line mbNET MDH 810, Руководство пользователя

Страница: 55 / 226

Page 55 of 226
Version: 3.3.5
– DR05 – 23.03.2017

Now click on Network
–
Internet and enter the following settings.
Label Description
Internet Connection
From the drop-down field, select the setting
Internet via WAN
Connection Mode Select Keep connection
Lock connection by
Using the drop-down field you can decide whether the Internet con-
nection should be closed when one of the inputs receives a signal
(internally-generated, between 10 and 30V).
Broadcast IP address via email
Enable this setting.
Select whether the IP address should be sent to the
email address listed.
Email Enter the email address to which the IP address is to be sent here.
For a detailed description of the
Network
–
Internet settings, please see section Network
– Internet

Save your changes by clicking Save Changes.

Click on System
–
User and add a user with dial-in rights. For further notes on adding users and assigning
specific rights, please see section Adding users

Finally, to save your changes permanently to the industrial router, click Apply Changes.
Please Note: The internet-by-Call providers are changing their prices often. MB
Connect Line cannot be made responsible for any price changes.
For devices to be able to communicate with the LAN interface, they must be config-
ured using the
mbNET LAN interface IP address as the device gateway. Communi-
cation is not via PPP addresses, but via the mbNET LAN interface IP address and
the IP addresses of connected devices.