MB Connect Line mbNET MDH 810 Скачать руководство пользователя страница 155

Страница: 155 / 226

Page 155 of 226

Version: 3.3.5

– DR05 – 23.03.2017

LAN>WAN

18.3

This setting governs the outgoing data traffic, i.e. the following settings only apply to outgoing da-
ta traffic.

Label

Description

Enable

Check the box by clicking it to enable the subsequent settings after they are saved.

Action

The following options are available for selection:

Drop

: If this option is selected, it means that no data packets can pass. The sender is not no-

tified about the whereabouts of the data packets.

Reject

: If this option is selected, the data packets are rejected. The sender is notified that the

data packets have been rejected.

Accept

: If this option is selected, the data packets can pass.

Source IP

Enter the IP of a computer from which data packets are sent to the Internet here.
If you leave the field blank, the set action applies to all IP addresses.

Source Port

Enter the port via which the data packets go to the Internet here.

Protocol

The following options are available for selection:

All

: The set rule applies to all protocols.

tcp

: The set rule only applies to the TCP protocol.

udp

: The set rule only applies to the UDP protocol.

icmp

: The set rule only applies to the ICMP protocol (ping).

WAN interface

This setting defines the WAN interface to which the rule is to be applied.

„Internet“ or „WAN

Ethernet

“ can be selected.

Destination IP

Enter the destination address of the data packets on the Internet here.

Destination
Port

Enter the port via which the data packets are sent to the destination IP here.

Edits the settings in the current line.

Deletes entries in the current line.

Accepts the new rule and temporarily stores it.

Temporarily saves the created rule.

Changes the order of the created rules.

Содержание mbNET MDH 810



































































































































































































































Результаты поиска

Содержание mbNET MDH 810

Отзывы:

Похожие инструкции для mbNET MDH 810

Бренды по названию

Популярные бренды

MB Connect Line mbNET MDH 810, Руководство пользователя

Результаты поиска

Содержание mbNET MDH 810

Отзывы:

Похожие инструкции для mbNET MDH 810

Бренды по названию

Популярные бренды