MB Connect Line mbNET MDH 810, Руководство пользователя

Страница: 53 / 226

Page 53 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Configuring the industrial router for connection via the Internet 12.3
The following diagram shows how to connect the industrial router to a client computer via the Internet. The client is a
computer with a modem connection.
Connection and configuration of the router 12.3.1
Before you start make sure that the router is connected to a suitable power source and he Power and
Ready LEDs are shining solid green.
Connecting the router 12.3.1.1
Analog connection only (applies to device models MDH xx0)

Connect TAE adapter to analog cable.

Plug one end of the supplied cable into the RJ12 jack ( 1 ) on the bottom of
the router, and the other end into the TAE jack ( 2 ).
ISDN connection only (applies to device models MDH0x2)

Plug one end of the supplied cable into the jack ( 1 ), and the oth-
er end into ( 2 ) the NTBA.
GSM connection only (applies to device models MDHxx3 and xx4)

With an existing GSM connection, plug the end of the GSM antenna cable
into the jack on the bottom of the router.
IP
123.456.789.21
IP
77.180.121.116