Video Intercom Vandal-Resistant Door Station
·
User Manual
32
Figure 7-18
Set the Supplement Light
2.
Select the working mode for the door station: Video Intercom Device, Front-end
Device.
If you select the Video Intercom Device, the door station functions as a video
intercom device, while if you select the Front-end Device, the door station functions
as a camera only.
3.
Select the supplement light mode: Auto, Scheduled Switch.
Auto:
The camera of the door station switches between the day mode and the
night mode according to the illumination automatically.
Scheduled Switch:
The camera of the door station switches between the day
mode and the night mode according to the configured time period.
4.
Set the start time (day) and the end time (day).
The start time and the end time require configuring when the supplement light mode
is scheduled switch.
The camera of the door station will stay at day mode between the start time and end
time.
Note:
The interval between the start time and the end time should be more than 10s.
The start time should be earlier than the end time.
7.3.4
Configuring Network Settings
TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the door station over
network. The door station supports the IPv4.
Steps:
1.
Enter the TCP/IP settings interface:
Configuration > Network > Basic Settings >
TCP/IP.
