Video Intercom Vandal-Resistant Door Station
·
User Manual
31
Door Status:
The AI terminal supports connecting to the door magnetic.
Custom:
It is reserved.
3.
Set the output mode: Disabled, Electric Lock, Custom.
Disabled:
The function of the NO/NC/COM terminal is disabled.
Electric Lock:
The NO/NC/COM terminal supports connecting to the electric lock
(electric strike, and magnetic lock).
Custom:
It is reserved.
4.
Click
Save
to finish the settings.
Call Button
Purpose:
You can call the indoor station (resident) and the master station (management center)
via the door station by pressing or holding down the call button.
Default settings of the call button: when you press the call button, it calls the resident;
and when you hold down the call button, it calls the center.
Steps:
1.
Enter the call button settings interface:
Configuration > Video Intercom > Call Button.
Figure 7-17
Set the Call Button
2.
Check the checkbox of
Quick Press for Calling Center
to change the call button mode.
After enabling
Quick Press for Calling Center
, when you press the call button, it calls
the center, and when you hold down the call button, it calls the resident.
Supplement Light
Purpose:
Supplement light function gives you an option to control the IR LED.
Steps:
1.
Enter the call button settings interface:
Configuration > Video Intercom >
Supplement Light Settings.
