─４─
Clip Removal
1. Detach the 12 clips (small) and 3 clips (large) installed to the side
under spoiler.
Body hole drilling
1. Cut out the templates with scissors along the cut lines.
2. Affix the templates to the side under spoiler with the printed side
facing the side under spoiler, and aligned with the corner of the clip
as shown in the figure.
(12 locations)
3. Install a clip (1) to the upper hole where the mudflap was installed.
(Vehicles with mudflaps)
4. Attach the side under spoiler to the installation position so that there
are no gaps, and temporarily fix it using the rivet (1).
•
The detached clips will be reused. Be careful not to damage
or lose them.
CAUTION
•
The figure shows the right side, however, perform the same
procedure for the left side.
NOTE
5. SIDE UNDER SPOILER INSTALLATION
12 Clips (small)
3 Clips (large)
Vehicle front
6
Align with corner
Template
RH1
2
5
7
8
9
10
11
12
Side under spoiler (RH)
3
4
Vehicle front
Template
: Cut line
Side under spoiler
Rivet
Vehicle front
Install clip to mudflap
installation hole (vehicles
with mudflaps)
