2
REQUIRED PARTS
(Check the following parts prior to installation)
①
Side under spoiler (RH, LH)
(Painted product)
Quantity 1each
②
Clip (Small)
Quantity 24
③
Clip (Large)
Quantity 6
INSTALLING PROCEDURE
(Assembly after painting)
Clip installation (Large, small)
1. Install the 3 (large) previously removed clips, and
the 12 (small) ones to the side under spoiler.
•
Clip (Small)
Do not insert the clips deeply but rather insert them to
the center of the installation hole.
2
3
•
RH is shown in the figure below. Assembly LH in the same manner.
Note
•
Check the chart shown below and make sure that no parts are missing.
•
Make sure all the component parts are free from dirt, scratches, or damages.
CAUTION
•
Be careful to insert the large and small clips in
the correct places.
CAUTION
12 clips (Small)
3 clips (Large)
<View from
above>
Centered in installation hole
<View from
above>
Centered in installation hole
