background image

 

1

 

GENUINE   SIDE UNDER SPOILER 

COMPONENT PARTS INSTALLATION MANUAL 

 

 

In order to maintain the optimum condition, read this manual carefully and familiarize 
yourself with this product after completing painting. 

 
 
 
 

• 

The 

CAUTION

 symbols in this manual indicate safety precautions at the  time of 

installation. Read the instruction carefully to prevent injuries or possible damage to 
your vehicle.

 

 CAUTION:

 

Indicates a situation in which bodily injury or damage to the vehicle 

could result if the caution is ignored.

 

• 

Do not modify the side under spoiler. 

• 

Do not install the side under spoiler in any way other than described in the following 

instructions. 

• 

If you have any questions about the use of the accessory, ask your Mazda dealer for 

proper advice before using it. 

• 

Mazda and its suppliers are not responsible for injuries, accidents, and damage to 

persons and property that arise from the failure of the dealer or installer to follow these 
instructions.

 

 

 

PART NAME: 

SIDE UNDER SPOILER 

PART NUMBER: 

CC29 V4 910F

 

VEHICLE:  

Mazda5 

 

FINISHED IMAGES

 

 

CAUTION

1

* RH is shown in this figure 

 

 

Clip (Small) 

Clip (Large) 

Содержание CC29 V4 910F












Отзывы: