8
Negative battery cable disconnection
1. Set the selector lever to P range.
(AT vehicles only)
2. Disconnect the negative battery cable and wrap
tape around it to insulate.
Tightening torque : 4.0
-
6.0 N
･
m
Tonneau cover removal
1. Hold the shaded areas shown in the figure and move
the tonneau cover in the direction of the arrow.
2. Remove the tonneau cover in the direction of the
arrow shown in the figure.
5. VEHICLE PART REMOVAL
Be careful not to damage or lose any parts removed from the vehicle since they will be reused.
CAUTION
When removing/installing the parts, park the
vehicle on level ground and apply the side
brake securely. Be sure to turn the ignition
switch off, otherwise the vehicle can move,
causing personal injury or vehicle damage.
WARNING
If the negative battery cable is connected while
performing the work, it may cause electrocution
or other personal injuries. Disconnect the
negative battery cable before
removal/installation.
WARNING
Negative battery cable
Vehicle front
Tonneau cover
Tonneau cover
