27
■
Cutting the cushioning tape
7. Cut the cushioning tape into thirds as shown in the
left figure.
■
Sensor installation
1. Tap the punch into the center of the scribed cross-hair lines for sensor installation on the back side of the
bumper.
7. PREPARATION FOR INSTALLATION
Rear sensor
scribed cross-hair lines
Rear bumper back side
Installation
view
Note
20mm
Rear bumper surface
Rear sensor
scribed cross-hair lines
Back sensor
scribed cross-hair lines
Cushioning tape
1/3
1/3
1/3
1/3
1/3
1/3
