29
7. Remove the bezel from the sensor and install it to the surface of the rear bumper with the bezel dot mark on the
top.
8. First install the spacer, then sensor with rubber to the back side of the rear bumper.
The shapes of the washers differ, therefore verify the shape before installing them.
Insert the sensor projection into the washer recess.
After installing, make sure the rear sensor and back sensor are securely pressed into the rear bumper.
CAUTION
Rear bumper back side
Rubber
Rear sensor
Sensor
spacer
Rear sensor
Back sensor
Rear bumper
back side
Rear bumper
back side
Rear bumper
back side
Rubber
Rubber
Rear bumper surface
Dot mark
Sensor
spacer
Sensor
spacer
(1)
(1)
(1)
(2)
(2)
(2)
(3)
(3)
(3)
