Mazda 8T12-EA-03K Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 326

Mazda 8T12-EA-03K Скачать руководство пользователя страница 94

Black plate (94,1)

Hood

WARNING

Closed and Securely Locked Hood:
A hood that is not closed and securely
locked is dangerous as it could fly
open while the vehicle is moving and
block the driver's vision which could
result in a serious accident. Always
check that the hood is closed and
securely locked.

q

Opening the Hood

1. With the vehicle parked, pull the

release handle to unlock the hood.

2. Slide the hood latch to the right and lift

the hood.

3. Use the support rod to hold the hood

open.

Clip

Support rod

q

Closing the Hood

1. Check under the hood area to make

certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.

2. Insert the support rod in its clip while

holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.

3. Close the hood so that it locks securely.

3-26

Knowing Your Mazda

Doors and Locks

Mazda6_8T12-EA-03K_Edition1 Page94
Friday, December 5 2003 8:55 AM

Form No.8T12-EA-03K

«
...
92
93
94
95
96
...
»

Содержание 8T12-EA-03K







































































































































































































































































































































Отзывы:

Нет отзывов