Mazda 8T12-EA-03K Скачать руководство пользователя страница 149 | Manualshive

Страница: 149 / 326

Mazda 8T12-EA-03K Скачать руководство пользователя страница 149

Black plate (149,1)

A system malfunction is indicated when
the warning light constantly flashes,
illuminates or doesn't illuminate at all
when the ignition switch is turned to the
ON position. If any of these occur, consult
an Authorized Mazda Dealer as soon as
possible. The system may not work in an
accident.

WARNING

Self-Servicing the Air Bag/
Pretensioner Systems:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled. This
could cause serious injuries. Never
tamper with the systems and always
have an Authorized Mazda Dealer
performs all servicing and repairs.

q

Low Fuel Warning Light

Low fuel
warning light

This warning light in the fuel gauge
signals that the fuel tank will soon be
empty.
Refuel as soon as possible.

q

Seat Belt Warning Light

If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, the seat belt warning light
will remain on until the belt is fastened.
If the system does not operate correctly,
consult an Authorized Mazda Dealer.

q

Door-Ajar Warning Light

This warning light comes on when any
door isn't securely closed.

q

Low Washer Fluid Level
Warning Light

í

This warning light indicates that little
washer fluid remains. Add fluid (page
8-18).

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

5-33

í

Some models.

Mazda6_8T12-EA-03K_Edition1 Page149
Friday, December 5 2003 8:56 AM

Form No.8T12-EA-03K

«
...
147
148
149
150
151
...
»

Содержание 8T12-EA-03K







































































































































































































































































































































Отзывы:

Нет отзывов