Mazda 8T12-EA-03K Скачать руководство пользователя страница 197

Страница: 197 / 326

Black plate (197,1)

Press the scan button (

) during play

to start scan play operation (the track
number will flash).
Press the scan button (

) once again to

cancel scan play.

NOTE

If the unit is left in scan, normal play
will resume where scan was selected.

Repeat play

This feature makes it possible to listen to
a selection repeatedly.

Press the repeat button (

) during play.

The current selection will be repeated
(

“

RPT

”

will be displayed).

Press the repeat button (

) once again

to cancel repeat play.

Random play

This feature allows the MD player to
randomly select the order of the songs.

Press the random button (

) during

play. The next selection will be randomly
selected (

“

RDM

”

will be displayed).

Press the random button (

) once again

to cancel random play.

Changing the display

To change the display during MD play,
press the display button (

) to advance

through each of the following displays:

Track number/
Elapsed play
back time

Disc title

Song title

NOTE

If there is no song or disc title recorded
on the MD,

“

NO TITLE

”

will be

displayed.

Long disc or song titles

When long disc or song titles cannot be
completely displayed, rotate the display
feed dial (

) to the right.

The remainder of the title will proceed
and appear on the display to the end of the
title.

Interior Comfort

Audio System

6-33

Mazda6_8T12-EA-03K_Edition1 Page197
Friday, December 5 2003 8:57 AM

Form No.8T12-EA-03K

Содержание 8T12-EA-03K







































































































































































































































































































































Результаты поиска

Содержание 8T12-EA-03K

Отзывы:

Mazda 8T12-EA-03K, Руководство пользователя, Страница: 197 / 326

Результаты поиска

Содержание 8T12-EA-03K

Отзывы: