Mazda 8T12-EA-03K Скачать руководство пользователя страница 240

Страница: 240 / 326

Black plate (240,1)

Towing Description

We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.

Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.

A towed vehicle usually should have its
front wheels off the ground. If excessive
damage or other conditions prevent this,
use wheel dollies.

Wheel dollies

When towing with the rear wheels on the
ground, release the parking brake.

CAUTION

Don't tow the vehicle pointed backward
with driving wheels on the ground. This
may cause internal damage to the
transaxle.

CAUTION

Don't tow with sling-type equipment.
This could damage your vehicle. Use
wheel-lift or flatbed equipment.

7-20

In Case of an Emergency

Emergency Towing

Mazda6_8T12-EA-03K_Edition1 Page240
Friday, December 5 2003 8:58 AM

Form No.8T12-EA-03K

Содержание 8T12-EA-03K







































































































































































































































































































































Результаты поиска

Содержание 8T12-EA-03K

Отзывы:

Mazda 8T12-EA-03K, Руководство пользователя, Страница: 240 / 326

Результаты поиска

Содержание 8T12-EA-03K

Отзывы: