Mazda 8T12-EA-03K Скачать руководство пользователя страница 193 | Manualshive

Страница: 193 / 326

Mazda 8T12-EA-03K Скачать руководство пользователя страница 193

Black plate (193,1)

Seek tuning

Pressing the seek tuning button (

,

)

will cause the tuner to seek a higher or
lower frequency automatically.

NOTE

If you continue to press and hold the
button, the frequency will continue
changing without stopping.

Scan tuning

Press the scan button (

) to

automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
button (

) again during this interval.

Preset channel tuning

The 6 preset channels can be used to store
6 AM and 12 FM stations.

1. To set a channel first select AM, FM1,

or FM2. Tune to the desired station.

2. Depress a channel preset button for

about 2 seconds until a beep is heard.
The preset channel number and station
frequency will be displayed. The
station is now held in the memory.

3. Repeat this operation for the other

stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.

NOTE

If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.

Auto memory tuning

This is especially useful when driving in
an area where the local stations are not
known. Additional AM/FM stations can
be stored without disturbing the
previously set channels.

Press and hold the auto memory button
(

) for about 2 seconds until a beep

is heard; the system will automatically
scan and temporarily store up to 6 stations
with the strongest frequencies in each
selected band in that area.

After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed.
Press and release the auto memory button
(

) to recall stations from the auto-

stored stations. One stored station will be
selected each time; its frequency and
channel number will be displayed.

NOTE

If no stations can be tuned after
scanning operations,

“

A

”

will be

displayed.

Interior Comfort

Audio System

6-29

Mazda6_8T12-EA-03K_Edition1 Page193
Friday, December 5 2003 8:57 AM

Form No.8T12-EA-03K

«
...
191
192
193
194
195
...
»

Содержание 8T12-EA-03K







































































































































































































































































































































Отзывы:

Нет отзывов