manualshive.com logo in svg

Mazda 1979-1984 RX7, Технический сервисный бюллетень, Страница: 144 / 182

Поделиться
Скачать
Mazda 1979-1984 RX7 Скачать руководство пользователя страница 144

REMANUFACTURED TRANS (CANADIAN) - DIAGNOSIS SHEET CAT. J, NO. 95-02

Article Text (p. 3)

1983 Mazda RX7

For www.iluvmyrx7.com    

Copyright © 1998 Mitchell Repair Information Company, LLC

Saturday, September 08, 2001  09:44AM

   as specified in the enclosed revised Parts Merchandising Bulletin.

  If a core unit is received without a properly completed "Warranty
Tag" and/or properly completed "Automatic Transmission Diagnosis
Information Sheet" the core credit will not be processed for payment.
The dealer will be advised of the situation by the Warranty
Administration Department. Once the missing information is
faxed/received by the Warranty Administration Department, the core
credit will be processed.

  If the requested information is not received within 10 working days,
the core unit will be shipped back to the dealer, freight collect.

  Two copies of this Service Bulletin are being supplied to each
dealer. Please give the second copy to the Mazda Parts Manager.

NOTE:  Five copies of the Automatic Transmission Diagnosis Information
       Sheet are being supplied with this bulletin. Ensure 1 copy
       remains intact with the original bulletin so that additional
       copies can be produced as necessary by your dealership.

  Your understanding and continued co-operation are appreciated.
See Fig. 1 for example.

AUTOMATIC TRANSMISSION DIAGNOSIS INFORMATION SHEET

ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

1. Dealer Code _________ RO ________ Date ________ Model Yr. ________
   VIN ________________________________ Odometer _________________

2. Customer Concern: (Check appropriate box)

   Shifting/Engagement:        Does Not Occur   Slips    Delayed
Harsh
   A. Engagement into drive      ____          ____     ____      ____
   B. Engagement into reverse    ____          ____     ____      ____
   C. 1-2 Upshift                ____          ____     ____      ____
   D. 2-3 Upshift                ____          ____     ____      ____
   E. 3-4 Upshift                ____          ____     ____      ____
   F. Downshifts                 ____          ____     ____      ____
   G. Kickdowns                  ____          ____     ____      ____

Noise/Vibration:    ____ Clunk   ____ Whine   ____ Buzz    ____ Other
Condition Occurs:   ____ Hot     ____ Cold
Frequency:          ____ Intermittent        ____ Always

Other: _______________________________________________________

3. Technician Diagnosis:

   Visual Inspection: (note leaks) _________________________________

Содержание 1979-1984 RX7























































































































































































Отзывы:

Нет отзывов