background image

VIBRATION/PULSATION WHILE BRAKING - PROCEDURE CAT. P, NO. 001/95

Article Text (p. 6)

1983 Mazda RX7

For www.iluvmyrx7.com    

Copyright © 1998 Mitchell Repair Information Company, LLC

Monday, September 03, 2001  03:37PM

626/MX-6
  Rear Brakes/Disc Plate(s), R&R (one side)
    Labor Operation:    P0208ARX/0.4 hrs.
  Rear Brakes/Disc Plate(s), R&R (both sides)
    Labor Operation:    P0208BRX/0.6 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (one sides)
    Labor Operation:    P0214AMX/0.7 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (both sides)
    Labor Operation:    P0214BMX/1.2 hrs.
  Rear Brakes/Pad(s), R&R (one sides)
    Labor Operation:    P0209ARX/0.4 hrs.
  Rear Brakes/Pad(s), R&R (both sides)
    Labor Operation:    P0214BRX/0.5 hrs.

RX-7
  Rear Brakes/Disc Plate(s), R&R (one side)
    Labor Operation:    P0208ARX/0.3 hrs.
  Rear Brakes/Disc Plate(s), R&R (both sides)
    Labor Operation:    P0208BRX/0.4 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (one sides)
    Labor Operation:    P0214AMX/0.7 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (both sides)
    Labor Operation:    P0214BMX/1.2 hrs.
  Rear Brakes/Pad(s), R&R (one sides)
    Labor Operation:    P0209ARX/0.3 hrs.
  Rear Brakes/Pad(s), R&R (both sides)
    Labor Operation:    P0214BRX/0.5 hrs.

MX-5
  Rear Brakes/Disc Plate(s), R&R (one side)
    Labor Operation:    P0208ARX/0.4 hrs.
  Rear Brakes/Disc Plate(s), R&R (both sides)
    Labor Operation:    P0208BRX/0.5 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (one sides)
    Labor Operation:    P0214AMX/0.7 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (both sides)
    Labor Operation:    P0214BMX/1.2 hrs.
  Rear Brakes/Pad(s), R&R (one sides)
    Labor Operation:    P0209ARX/0.4 hrs.
  Rear Brakes/Pad(s), R&R (both sides)
    Labor Operation:    P0214BRX/0.5 hrs.

MPV (1994-95)
  Rear Brakes/Disc Plate(s), R&R (one side)
    Labor Operation:    P0208ARX/0.6 hrs.
  Rear Brakes/Disc Plate(s), R&R (both sides)
    Labor Operation:    P0208BRX/0.8 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (one sides)
    Labor Operation:    P0214AMX/0.7 hrs.
  Rear Brakes/Disc Plate(s), Machine on vehicle (both sides)
    Labor Operation:    P0214BMX/1.2 hrs.

Содержание 1979-1984 RX7























































































































































































Отзывы: