Maytech Waterproof Remote Control User Manual_20191012 by Eric and Eileen
10 / 17
Press two triggers together, the brake trigger gets priority output.
ESurf: Neutral position, PWM output 1000 microsecond;
Press throttle trigger, PWM output range 1000-2000 microsecond;
When Throttle trigger is at 10%-100% throttle position, long press brake trigger enter cruise
speed control mode(please refer to “Item 9” in this manual) .
16.1.5
【
Throttle signal percentage
】
Value of the current output PWM signal percentage. In ESK8 mode,
display range is ±100%; in ESurf mode, display range is 0-100%.
When VESC Thr is set to None, receiver’s PWM_T output PWM signal as throttle signal.
When VESC Thr is set to Current/Duty Cycle, receiver’s TXD/RXD output signal to VESC RX/TX as
throttle signal .
16.1.6
【
Relay switch
】
Refer to “Item 8” in this manual.
16.1.7
【
Transistor switch
】
Refer to “Item 8” in this manual.
16.2 Esurf mode Motor RPM display:
In Esurf mode, after selecting suitable Speed Source, when screen displays main interface, short press
Function Button, it will change to Motor RPM interface. For different Speed Source, text in the lower right
corner is different.
Motor RPM is detected by one Motor phase wire.
Motor RPM is detected by one hall sensor wire.
