8
HOW TO USE THE KEY PADS TO PROGRAM THE CONTROLS
1. The LOWER LEFT key pad is used to adjust the values associated with set-up codes. Pressing the key
pad will increment the value. Rapid adjustment is possible by holding the key pad down.
2. The LOWER MIDDLE key pad will advance you through the set-up codes. Pressing the key pad will
advance you to the next available set-up code. Holding the key pad down will automatically advance
through the set-up codes at a rate of one (1) per second.
3. The LOWER RIGHT key pad is used to select or deselect options.
START OPERATING SET-UP
PD Models:
Insert access door key, turn, and lift to remove access door.
Before proceeding, it is worth noting that, despite all of the options available, an owner can simply choose to
uncrate a new commercial machine, hook it up, plug it in and have a unit which operates.
PN Models:
Insert service key and turn to “PROGRAM”.
PN
units are pre-set for free cycle operation so they can be run without coins.
SET-UP CODES
The
LOWER MIDDLE
key pad will advance you from code to code. The
LOWER LEFT
key pad will change the code
value. The
LOWER RIGHT
key pad will select or deselect options.
FOR PN MODELS:
The set-up codes are the same as for the “PD” models except where noted.
The set-up code is indicated by the one or two left hand characters. The set-up code
value
is indicated by the two or
three right hand characters.
CODE
EXPLANATION
607
6
REGULAR CYCLE PRICE
07
Represents the number of coins (coin 1); may adjust from 0
–
39. (See VALUE OF COIN 1.)
Advance from 0
–
39 by pressing the
LOWER LEFT
key pad
.
Presently set for 7 x coin 1 value = 1.75
PN MODELS ONLY:
Presently set for 0 coins.
Press the
LOWER MIDDLE
key pad once to advance to next code.
710
7
WASH LENGTH
10
This is the number of minutes for WASH.
Choose from 8 –20 minutes by pressing the
LOWER LEFT
key pad.
Press the
LOWER MIDDLE
key pad once to advance to next code.
811
8
RINSE CYCLES
11
This is the length and total number of rinses.
Each rinse agitation is 1–4 minutes, with a choice of 1 or 2 rinses.
The middle digit is the length of rinse agitation and the right digit is the number of rinses.
The number is changed in the following sequence (11, 21, 31, 41, 12, 22, 32, 42) by pressing the
LOWER LEFT
key pad.
Press the
LOWER MIDDLE
key pad once to advance to next code.
The WOOLENS (if available) and DELICATES & KNITS cycles have a fixed rinse agitation length of
one minute.
900
9
CYCLE COUNTER OPTION
This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.
00
Not Selected ‘OFF’.
0C
Selected ‘ON’ and not able to be deselected. Press the
LOWER RIGHT
key pad 3 consecutive
times to select ‘ON’. Once selected ‘ON’ it cannot be deselected.
Press the
LOWER MIDDLE
key pad once to advance to next code.
