Maytag MAT12CS Скачать руководство пользователя страница 10

9

1.00

1.

MONEY COUNTER OPTION

This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.

00

Not Selected ‘OFF’.

0C

Selected ‘ON’.
Press the 

LOWER RIGHT

key pad 3 consecutive times to select ‘ON’ and 3 consecutive times to

remove (Not Selected ‘OFF’.)  Counter resets by going from ‘OFF’ to ‘ON’.

Press the 

LOWER MIDDLE

key pad once to advance to next code or permanently select money

count option by the following procedure.

C0

Selected ‘ON’ and not able to be deselected.
To select ‘ON’ and not able to be deselected, first select ‘ON’, then within two seconds press the

LOWER RIGHT 

keypad twice, the 

LOWER LEFT 

keypad once, and exit the set-up mode.

2.00

2.

SPECIAL PRICING OPTIONS

This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.

00

Not Selected ‘OFF’.

SP

Selected ‘ON’.

Press the 

LOWER RIGHT

key pad once for this selection.

If SPECIAL PRICING OPTION is selected, you have access to codes 3. through 9.

Press the 

LOWER MIDDLE

key pad once to advance to next code.

Options to use if SPECIAL PRICING is selected.

3.07

3.

SPECIAL CYCLE PRICE

07

Represents the number of coins (coin 1): may adjust from 0 – 39.  (See VALUE OF COIN 1.)
Advance from 0 – 39 by pressing the 

LOWER LEFT 

keypad.

Presently set for 7 x coin 1 value = 1.75.

PN MODELS ONLY:

Presently set for 0 coins.

Press the 

LOWER MIDDLE

key pad once to advance to next code.

5.00

5.

TIME-OF-DAY-CLOCK, MINUTES

00

This is the TIME-OF-DAY-CLOCK, minute setting; select 0 –59 minutes by pressing the 

LOWER LEFT

key pad.

Press the 

LOWER MIDDLE

key pad once to advance to next code.

6.00

6.

TIME-OF-DAY-CLOCK

,

HOURS  

(NOTE: Uses military time or 24 hour clock)

00

This is the TIME-OF-DAY-CLOCK, hour setting; select 0 –23 hours by pressing the 

LOWER LEFT

key pad.

Press the 

LOWER MIDDLE

key pad once to advance to next code.

7.00

7.

SPECIAL PRICE START HOUR  

(NOTE: Uses military time or 24 hour clock)

00

This is the start hour; 0 –23 hours.  Select START HOUR by pressing the

LOWER LEFT

key pad.

Press the 

LOWER MIDDLE

key pad once to advance to next code.

8.00

8.

SPECIAL PRICE STOP HOUR.

(NOTE: Uses military time or 24 hour clock)

00

This is the stop hour; 0 –23 hours.  Select STOP HOUR by pressing the 

LOWER LEFT

key pad.

Press the 

LOWER MIDDLE

key pad once to advance to next code.

9.10

9.

SPECIAL PRICE DAY

10

This represents the day of the week and whether special pricing is selected for that day.  A number
followed by ‘0’ indicates no selection that particular day (9.10).  A number followed by an ‘S’ indicates
selected for that day (9.1S).

Days of the week (1-7) are selected by pressing the 

LOWER LEFT

key pad.

When exiting setup code “9.”, the display must show current day of week.

SPECIAL PRICE DAY

Days of the week

If selected, would show

10

Day 1

Sunday

1S

20

Day 2

Monday

2S

30

Day 3

Tuesday

3S

40

Day 4

Wednesday

4S

50

Day 5

Thursday

5S

60

Day 6

Friday

6S

70

Day 7

Saturday

7S

Press the 

LOWER MIDDLE

key pad once to advance to next code.

Содержание MAT12CS
















Отзывы: