10
A.00
A.
VAULT VIEWING OPTION
This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.
00
Not Selected ‘OFF’.
SC
Selected ‘ON’.
Press the
LOWER RIGHT
key pad once for this selection. When selected, the money and/or cycle
counts will be viewable (if counting is selected), when the coin box is removed.
Press the
LOWER MIDDLE
key pad once to advance to next code.
b.05
b.
VALUE OF COIN 1.
05
This represents the value of coin 1 in number of coin units. (See NOTE ON COIN UNITS.)
5 x coin unit = 0.25.
By pressing the
LOWER LEFT
key pad you have the option of 1–199.
Press the
LOWER MIDDLE
key pad once to advance to next code.
C.20
C.
VALUE OF COIN 2.
20
This represents the value of coin 2 in number of coin units. (See NOTE ON COIN UNITS.)
20 x coin unit = 1.00.
By pressing the
LOWER LEFT
key pad you have the option of 1–199.
PN MODELS ONLY:
Presently set for 05 = 0.25.
Press the
LOWER MIDDLE
key pad once to advance to next code.
d.00
d.
COIN SLIDE OPTION
This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.
00
Not Selected ‘OFF’.
CS
Selected ‘ON’.
Press the
LOWER RIGHT
key pad 3 consecutive times for this selection. When coin slide mode is
selected, set b. equal to value of slide in number of coin units. Set step 6 (regular cycle price) and
step 3. (special cycle price) to number of slide operations. If the installer sets up “CS” on a coin drop
model, it will not register coins. (See NOTE ON COIN UNITS.)
Press the
LOWER MIDDLE
key pad once to advance to next code.
E.00
E.
ADD COINS OPTION
This option is either SELECTED ‘ON’ or NOT SELECTED ‘OFF’.
This option causes the customer display to show the number of coins (coin 1) to enter,
rather than the X.YY amount.
00
Not Selected ‘OFF’.
AC
Selected ‘ON’.
Press the
LOWER RIGHT
key pad 3 consecutive times for this selection.
Press the
LOWER MIDDLE
key pad once to advance to next code.
F.00
F.
ENHANCED PRICING OPTION
00
Not Selected ‘OFF’.
CP
Cycle-Based pricing enabled. This option allows configuration of different prices for cold, warm, and
hot water cycles.
Su
Super Cycle pricing enabled. This option allows customers to upgrade cycles by depositing extra
money. Setup codes ‘H.’ and ‘h.’ will only display when this option is enabled.
Press the
LOWER RIGHT
key pad 3 consecutive times for this selection.
Press the
LOWER MIDDLE
key pad once to advance to next code.
H.01
H.
SUPER CYCLE UPGRADE PRICE
(Skipped unless super cycle pricing is enabled)
01
This represents the number of coin 1 required to upgrade a base cycle to a super cycle.
Advance from 0 – 39 by pressing the
LOWER LEFT
key pad.
Press the
LOWER MIDDLE
key pad once to advance to next code.
h.01
h.
SUPER CYCLE TYPE
(Skipped unless super cycle pricing is enabled)
01
This represents the super cycle upgrade option.
Press the
LOWER LEFT
key pad to step through upgrade options 1 through 3 as follows:
01 - enhanced wash, extra 3 minutes of wash in addition to the programmed wash time.
02 - extra rinse for all cycles.
03 - both 01 and 02.
Press the
LOWER MIDDLE
key pad once to advance to next code.
