Installation and Operational Instructions
for ROBATIC
®
-clutch Type 500.30_.0
Sizes 3 – 7 (double-flow)
(B.5.5.GB)
27/11/2008 TK/EI/SU
Chr. Mayr GmbH + Co. KG
Tel.: 08341 / 804-241
Eichenstraße 1
Fax: 08341 / 804-422
87665 Mauerstetten
http://www.mayr.de
Page 1 of 8
Germany
eMail:
Please read the Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts.
Contents:
Page 1: - Contents
- Declaration of Conformity
- Safety and Guideline Signs
Page 2: - Safety Regulations
Page 3: - Safety Regulations
Page 4: - Clutch Illustrations
- Parts List
- Technical Data
Page 5: - State of Delivery
- Function
- Design
- Explanation of Terms
- Torque Characteristics
- Run-in Conditions
Page 6: - Installation Examples
- Boring the Rotor Hub
Page 7 - Installation
- Rotor De-installation
- Electrical Connection
- Maintenance und Inspection
- Disposal
Page 8: - Malfunctions / Breakdowns
Declaration of Conformity
A conformity evaluation for the applicable EU directives has been carried out for this product.
The conformity evaluation is set out in writing in a separate document and can be requested if required.
It is forbidden to start use of the product until the machine or system into which it should be built is operating in accordance with all
applicable EU directives.
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion.
This statement is based on the ATEX directive.
Safety and Guideline Signs
Danger!
Danger of injury to personnel and
damage to machines.
Please Observe!
Guidelines on important points.
Please Observe!
According to German notation, decimal points in this document are represented with a comma (e.g. 0,5 instead of 0.5).
