background image

3

ENG

Safety Instructions

Before you start exercising, be sure to read the entire operating manual, especially the Safety Information, the Maintenance and Clean-

ing Information and the Training Information. Also make sure that anyone else who uses this training device is familiar with this informa-

tion and observes it.

Always follow the maintenance and safety instructions in this manual very carefully. 

This training device may only be used for its specific intended use. Any misuse can cause risk of possible accident, damage to health 

or damage to the device for which the Distributor will not assume any liability.

Electrical Connection

 

A mains voltage of 220-230V is required to operate this training device.

 

The training device is only to be connected to the mains with the mains cable supplied using a 16A individually fused and earthed 

socket installed by a qualified electrician.

 

The training device is only to be switched on and off using the ON/OFF switch.

 

Always remove the electric plug from the socket before moving the training device.

 

Remove the electric plug from the socket before commencing any cleaning, maintenance or other works.

 

Do not connect the mains plug to a socket on a socket strip or on a cable drum.

 

If using a cable extension please ensure that this complies with DIN standards, VDE regulations and guidelines, technical rules 

issued by other European Union states.

 

Always place the mains cable so it cannot be damaged or cause a tripping hazard.

 

In operating or standby mode, electrical devices such as mobile phones, PCs, Televisions (LCD, plasma, tube, etc.), game con-

soles etc. will emit electro-magnetic radiation. For this reason, all these types of devices should be kept away from your training 

device as they could lead to malfunction, disturbances or false outputs being shown in heart rate measurements.

 

For safety reasons, always remove the electrical plug from the socket when the device is not in use.

Training Environment

 

Select a suitable space for your training device to provide an optimum amount of free space and highest level of safety. You 

should leave a free space measuring a minimum of 200 cm long and at least the width of the treadmill behind the device. A free 

space measuring a minimum of 50cm long and at least the width of the treadmill should be left in front of the device. 

 

Make sure that the area is well ventilated and that an optimum amount of oxygen is available during training. Avoid draughts.

 

Your training device is not suitable for outside use and so storage and training can only take place in a temperate, clean dry room.

 

The temperature range to operate or store this device is between a minimum of 10° and maximum of 30°

 

Do not operate or store your training device in wet areas such as in swimming pools, saunas etc.

 

Make sure that your training device is kept on flat, hard, clean ground both in operation and at rest. Any uneven surfaces must be 

removed or made good.

 

It is recommended that a floor covering (carpet, mat, etc.) should be placed under the device to protect damageable floors such as 

wood, laminates, floor tiles etc. Please ensure that this underlay cannot slip or slide.

 

Do not put this training device on pale or white coloured carpets or rugs as the feet of the device may leave marks.

 

Make sure that your training device and mains cable are kept out of contact with hot surfaces and are kept at a safe distance from 

any sources of heat e.g. central heating, hot stoves, furnaces, ovens or open fires.

Personal Safety Instructions for Training

 

The safety key must be inserted correctly before each training session can begin.

 

Remove the safety key and mains cable from the training device when not in use to avoid inappropriate or uncontrolled use by any 

other third party, e.g. children.

 

You should have a health check carried out by your doctor before you start any training 

 

Stop training immediately if you feel physically unwell or are experiencing any breathing difficulties.

 

Always start your training session at a low workload increasing it slowly but steadily throughout. Reduce the workload again to-

wards the end of your training session.

 

Suitable sports shoes and clothes should always be worn during training sessions. Make sure that loose clothes do not get caught 

up in the treadmill belt or rollers.

 

Your training device is only to be used by one person at a time.

 

Check each time before a training session to see if your device is in perfect condition. Never use your training device if it is faulty 

or defective.

 

You are only permitted to carry out repairs to the device yourself after having contacted our Service Department and on receipt of 

explicit permission to do so. Only original spare parts may be used at any time.

 

Your training device must be cleaned after each use. Remove all dirt including body sweat or any other liquids.

 

Always make sure that liquids (drinks, body sweat, etc.) do not get onto the vibrating plate or into the cockpit as this can cause 

damage to the mechanical and electronic components.

 

Your training device is not suitable for use by children.

 

Third parties, especially children and animals, must be kept at an appropriate safety distance during training.

 

Check if there are any items underneath the training device before each training session and remove them without fail. Never use 

the training device when items are underneath it.

 

Do not allow children to use your training device as a toy or climbing frame at any time.

 

Ensure that no body parts of your own or of third parties ever come in contact with any of the moving mechanisms.

Warning for pulse and heart rate measurement

Pulse and heart rate monitoring systems may be inaccurate. Excessive training can lead to serious injury or lead to death. If you feel 

unwell and / or faint, you must stop training immediately. Make sure that all persons using this exercise device are familiar with and 

understand this information and abide by it without fail.

The construction of this training device is based on state-of-the-art technology and highest modern technical safety standards. This 

training device is to be used by adults only! Extreme misuse and/or unplanned training can cause damage to your health!

Содержание RunMAXX 5.0

































Отзывы: