5
ENG
Carefully unpack all delivered parts. Have someone there to help you as some of the training device parts are
bulky and heavy.
Check that all the parts and fixing materials (screws, nuts, etc.) have been delivered.
Assemble the parts carefully as any damages or defects occurring due to mistakes made at the time of assem-
bly are not covered by the warranty or guarantee. Therefore, read through the assembly instructions carefully
before you start assembling, follow each assembly step exactly as described and keep to the correct sequence
of assembly as instructed. Assembly of the training device must be carried out thoroughly by adults only.
Assemble the training device in a location which is level, clean and clear of obstructions. 2 people are required
to carry out the assembly. Training can only start when the training device has been fully assembled.
Step 1: Preparing for Assembly
Remove all treadmill parts from the packaging. Place the base frame on a clean flat surface.
Step 2 Assembling the Side Frames
Lift the running deck of the treadmill upwards until it is safely latched in.
Connect the cable that protrudes down from the right side-frame with the cable that comes out of the base
frame. Insert the right side-frame into the base frame and secure it laterally with two hexagon socket screws
M8x50 and from above with a hexagon socket screw M8x15.
CAUTION
: Make sure that the cable does not get damaged or jammed.
Repeat this procedure to assemble the left side frame (Note: there are no cable connections on this side).
Assembly
