background image

1.700 mm

670 mm

1.729,5 mm

26

Technical Details

Technical details:

Braking system:  

 

Motor-controlled permanent magnet brake system

Resistance level adjustment:  

Computer controlled

Resistance levels:  

 

1 to 16 

Flywheel weight:  

 

approx. 9 kg

Flywheel Mass:  

 

approx. 24 kg

Drive Type:  

 

two-stage longitudinal ribbed belt

Stride Length:  

 

53 cm

Dimensions:  

 

approx. 1,729.5 x 670 x 1,700 mm (LxWxH)

Total weight:  

 

approx. 77 kg

Maximum user weight:  

160 kg

Mains Adapter:  

 

9V/1.000mA

Power supply:  

 

220-230V - 50Hz

Application:  

 

Home use 

    

 

European Disposal Regulations 2012/19/EU

Do not dispose your training device in the normal household rubbish.

Dispose the device at a communal waste disposal facility or at a registered waste disposal company.

Observe current regulations which apply accordingly. If in doubt seek advice from your local government office 

or county council as to where you can dispose of the device properly and in an environmentally sound manner.

Batteries / Rechargeable Batteries 

(if applicable to your device)

Batteries and rechargeable batteries should never be disposed of in the household rubbish.

Please be aware that all batteries can contain toxic substances and all consumers are obliged by law to dispose 

these at an appropriate collection point either at your local government office, county council or retail outlet.

If in doubt seek advice from your local government office or county council as to where you can dispose batter

-

ies properly and in an environmentally sound manner. Only dispose of batteries when they are empty.

Disposal

Dimensions

Cockpit

Display of: 

 

Time

 

Distance

 

Calorie Consumption

 

Power – WATT

 

Resistance – Level

 

Speed 

 

Wheel  revolutions per Minute – RPM

 

Pulse Rate (when using the hand sensors)

 

Heart Rate (when using an optional chest belt)

Содержание CX 5.1

































Отзывы: