background image

23

ENG

Recovery Heart Rate (RECOVERY) 

The recovery test measures how quickly you recover, i.e. how quickly and by how much your heart rate de-

creases after training.

After completing a workout, or after stopping the workout by pressing the Stop key, press the RECOVERY key 

and immediately place your hands on the hand pulse sensors. If you are wearing a chest strap, you do not need 

to hold on to the hand pulse sensors. Now the cockpit will try to determine your pulse for 10 seconds. If this 

fails, the test is automatically terminated.

If the cockpit has detected your pulse, a countdown of 60 seconds starts in which you must keep hold of the 

hand pulse sensors all the time (this is also not necessary if you are wearing a chest strap).

After the 60 seconds have elapsed, you can read the result on the display and compare it with the following 

table.

Result 

Evaluation

F1

Excellent

F2

Very good

F3

Good

F4

Satisfactory

F5

Sufficient

F5

Poor

Body Fat Analysis (Body Fat)

This program determines the percentage of body fat and the BMI of the user.

Press the FAT key. The currently selected user profile is dis

-

played as “U1”. If the wrong user profile has been selected, press 

the RESET key and select the correct user profile. Then press 

the FAT key again and grasp the hand pulse sensors with your 

hands. After successful measurement, the percentage of body fat 

is displayed with the corresponding symbol and BMI.

Body-Mass-Index (BMI)

This value is calculated from the ratio of body weight to height 

and is used to assess the body weight of a person in relation to 

their height. Please note that the BMI is only a rough guideline, 

as it does not account for physique and gender or the individual 

composition of the body mass of fat and muscle tissue. The “ide

-

al” BMI depends on the age.

 

 

 

              BMI  

 

 

Body fat percentage % 

 

 

 

        Symbols representing the body fat percentage 

 

 

Low  

 

        Normal  

               Raised  

 

         High

USB Charging Function

The cockpit has a USB connection located at the top of the cockpit. This connection is to be used only for charg-

ing of smartphones or tablet-PC’s during training. The cable required for this is not included in delivery. 

Cockpit

Age 

BMI

19 - 24 years

19 - 24

25 - 34 years

20 - 25

35 - 44 years

21 - 26

45 - 54 years

22 - 27

55 - 64 years

23 - 28

> 64 years

24 - 29

Содержание CX 4.3F





































Отзывы: