Vengeance
3
User
’s Manual
6
Introduction
1.6
I/O Outlets
Locate front and rear panel I/O outlets on the
Vengeance 3
Series server to connect
serial and Ethernet interface devices.
1.6.1
Front Panel
Power LED (Green)
LED light up when the server is powered on to perform diagnostic tests and proper
operation checking.
HDD LED (Green)
LED flashes when HDD is transmitting or receiving data.
Programmable LED GPIO1, GPIO2 (Green)
The GPIO1 and GPIO2 LEDs are controlled by programmable GPIO.
A sample
code will be provided that allow users to define their own function.
“Reset” Tact Switch
It is for reset the system to reboot your computer instead of turning OFF the power
switch. It is a better way to reboot your system for a longer life of the system’s
power supply.
Console Port
This is a Cisco RJ-type connector console port for command line interface and
diagnostic support by P.O.S.T (Power On Self Test).
USB2.0 Ports
Two USB 2.0 ports supported.
LAN Bypass LED(By LAN modules)
While running the LAN Bypass function, the LED always lights up.
Maximum Throughput
Slot 1 and 2: MAX 60Gbps
Slot 3 and 4: MAX 30Gbps
Back Slot: MAX 60Gpbs
