Maxx Vengeance 3, Руководство пользователя

Страница: 8 / 39

Vengeance 3
User
’s Manual
Introduction 3
 Super I/O
 Controller: Winbond NCT6102D
 Serial Ports: Total 2 asynchronous ports (2 x RS-232; one is 10-pin header onboard
but RX/TX signal is co-lay used for LCM module connector, the other one is RJ-type
connector with Cisco define)
 I/O Interface
 One console RJ-type connector, 2 x USB 2.0 connectors and 2 x RJ-45 connectors
(default) or up to 34 LAN ports (expandable).
 LED: 1x2 LED for Power and HDD
1x2 LED for GPO 1~2
 4 x LAN modules (optional)
 Tact switch x1 (hardware system reset button)
 Watchdog Timer
 One for System Reset: 255 levels, 1-255 sec
 One for LAN bypass: 7 levels, 1-64 sec
 USB
 Two USB 2.0 ports one front side, two USB 2.0/3.0 are internal pin headers
 Hardware Monitoring
 Controller Winbond NCT6102D
 CPU temperature, system temperature, power and fan speed detection
 Expansion Slot

Vengeance 3
support
s
four LAN modules & one PCIex8 slot through
optional
Riser
card ( via PCH only PCIe x4 signal).
 LAN Modules
Slim Module Ports Chipset Bypass
Vengeance 3
GbE Copper Modules
MW-CM-8P-GbE
8 Intel 82580EB 0 v
MW-CM-4P-GbE
4 Intel i211AT 0 v
GbE Fiber Modules
MW-FM-8P-GbE
4+4 Intel 82580EB 2 v
MW-FM-4P-GbE
4 Intel i350 0 v
10GbE Copper Modules
MW-CM-2P-10GbE
2 Intel X540 1 v
10GbE Fiber Modules
MW-FM-2P-10GbE
2 Intel 82599ES 0 v
MW-FM-4P-10bE
4 Intel XL710 0
V
Slot1/Slot2
25GbE Fiber Modules
MW-FM-2P-25G
2 Intel XXV710 0
V
Slot1/Slot2
40GbE Fiber Modules
MW-FM-2P-QSFP+
2 Intel XL710 0
V
Slot1/Slot2