Maxwell VWC 4000 Series, Руководство пользователя

Страница: 20 / 39

18
4.0 MAINTENANCE

!
Failure to carry out the maintenance and
service, as described herein, will invalidate
warranty.
Drainage Hole
Picture 4.1
Spacer tube drainage hole.
!
Before doing any maintenance work on electric
motor, starter units and wiring, make sure the
power supply is switched off.
4.1 WINDLASS MAINTENANCE

Every Trip:

The above deck parts should be washed
down with fresh water.
Every 6 months:

Disassemble the above deck components of
the windlass (up to the deckplate) as
described in Section 2.3.

Clean all components and check for
damage.

Grease the components using lithium
complex base, water proof grease.

Clean chromed surfaces with a cloth, damp
with kerosene. After cleaning spray them
with “CRC 3037 Long Life” or alternatively,
with “CRC 6-66” or “WD-40”. Regular use of
“CRC3097 Long Life” will assist in
maintaining the bright chrome finish.

Apply anti-seize compound on screw threads
and keyways.

Re-assemble in the reversed order.

Split gearbox from the spacer tube. Clean
and re-grease mating faces.

Inspect the components below deck for
corrosion, chipped paint etc, clean them and
touch up the paint if necessary. Spray them
for protection with “CRC 3013 Soft Seal”.

Spray fresh water into the drainage slot (see
picture 4.1) of gear box to breakdown and
flush away any build up of salt/debris, which
may have accumulated.

Check the electric power connections and
spray them with “CRC 3013 Soft Seal” for
protection.

Check the oil level in gearbox and top up if
necessary. (See Section 4.3).
Every 12 months:

Service Motor. The motors can be detached
safely, without draining oil from the gearbox.
If removing the motor, spray its shaft with an
anti-corrosion spray before reassembling.

Split gearbox from the spacer tube. Clean
and re-grease mating faces.