Visit: www.seekerwireless.co.uk for potential software updates
Page 6
Selecting an installation location:
Positioning the Antenna Unit
> Check for obstructions such as roof lights and vents.
> Check for electrical cables beneath screw fixing points.
> Check Antenna Unit cables will reach Control Box
(Maxview can supply extended cables).
> Do not allow the dish to overhang the edge of the vehicle
> Clearance around antenna system when in use is shown with reference
I
Key dimensions (cm) and weights
65cm Seeker: System weight 10kg
A:
17
B:
100
C:
67
D:
65
E:
96
F:
ø43*
85cm Seeker: System weight 11kg
A:
17
B:
117
C:
85
D:
87
E:
113
F:
ø43*
E
A
D
B
C
H
G
F
I
G:
52
H:
15
I:
110
G:
64
H:
14
I:
125
*Mounting plate
Positioning Control Box:
Site the Control Box in a convenient location where:
> Front and rear connections are accessible.
> Cables can be routed and concealed neatly.
> There is an electrical supply of 12V dc permanent and ignition.
> There is adequate ventilation.
> The Control Box is not encased with metal (if using wireless mode).
> Material construction and thickness is suitable for fixings.
Positioning Control Panel:
The Control Panel is designed to be easily visible in the living area as it displays a clock and thermometer when
in sleep mode.
> Do not place near wet hazard areas such as near sinks or bathroom.
> Do not place near heat sources or in direct sunlight.
> Avoid placing Control Panel next to walk ways where it could easily be knocked.
