Visit: www.seekerwireless.co.uk for potential software updates
Page 12
Installing batteries:
Remove the battery door and insert 2 AA (LR6) batteries as shown.
Take care to observe the correct polarity and to use good quality
sealed alkaline batteries.
Caution:
• Incorrect installation may cause battery leakage and
corrosion, resulting in damage to the Control Panel.
• Do not mix old and new batteries.
• Do not mix different battery types
(such as alkaline and manganese batteries).
• Do not use rechargeable (Ni-Cd) batteries.
• Do not burn or breakup batteries.
• Batteries must not be exposed to excessive heat such as direct sunlight or fire.
Attach Satellite Dish to Antenna Unit
1.
Ensure Antenna Unit is free from obstacles.
2.
Press installation button on reverse of Control Box to elevate
antenna. Once elevated turn off power to Control Box and
remove fuse.
3.
Fix satellite dish to Antenna Arm using M6 Button
Head Screws, M6 Nuts and 6mm Plastic Washers.
The 65cm and 85cm satellite dishes have different fixing hole
positions. Therefore 4 of the holes will be unused.
4.
Remove all tools, packaging and obstructions from roof.
5.
Replace fuse and turn power switch on. Antenna will
automatically retract into the park position.
Caution:
Replace Nylon locking nuts if they have been removed more
than twice. The locking action of the Nylon becomes less
effective if repeatedly assembled and disassembled.
Testing Antenna Unit:
Position the vehicle so that there is an unobstructed view of the southern sky. Connect a TV and Satellite
Receiver and follow instructions on page 14 to search for a satellite.
Caution:
Before driving vehicle on a highway ensure adhesive has cured. Check all fasteners are secure.
