15
SETUP menu Flow
No Battery
ACT SERVO POWER
SETUP
START/ENTER
START/ENTER
ESC/STOP
Following items can be setted in SETUP menu.
Key Beep ON/OFF, Buzzer ON/OFF, Temperature Cut-off, NiMH/NiCD Peak, Cycle wait time, Input power low.
Key Beep
ON
Buzzer ON >
START/ENTER
ESC/STOP
Key Beep ON
Buzzer
ON
>
START/ENTER
ESC/STOP
Temp Cut Off
50
°
>
START/ENTER
ESC/STOP
NiMH Peak
8
mV
NiCD Peak 13mV
START/ENTER
ESC/STOP
NiMH Peak 8mV
NiCD Peak
13
mV
Choose the
SETUP
function
Press DEC & INC, Scroll through the setting
within
ON, OFF
Press DEC & INC, Scroll through the setting
within
ON, OFF
Temperature Cut-Off
value range: 30~60°
if any battery you are charging or discharging
reaches this temperature the X6-Plus will stop
the charge/discharge.
NiMH Delta Peak value range: 3~20mV
NiCD Delta Peak value range: 10~20mV
Set the Cycle wait time
value range: 1~30 Min
Set the Input voltage protection.
value range: 10.8~16.0V
When input voltage is below the value, X6-
Plus will stop charge/discharge.
START/ENTER
ESC/STOP
Cycle Wait Time
5
min >
START/ENTER
ESC/STOP
Input Power Low
Cut Off:
11.0
V >
START/ENTER
Setup Data Save
...............
