MaxPro PROFESSIONAL 111-1202, Руководство пользователя

Страница: 6 / 33

4 GB
Do not let paint be a ached onto a movable scraping knife for the air outlet. Otherwise, the paint will be
on fi re a er a cert
Paint removal
Do not use the tool to remove lead-containing paint. Since stripped paint, paint residues and smoke may
contain lead and the lead belongs to a toxic substance, once the lead is accumulated on the surface, it may
be swallowed due to the behavior of touching the mouth with the hand. Even though a very li of lead
is absorbed, incurable brain and nerve system damages may be caused. Children and fetuses are the most
vulnerable.
During paint removal, the worksite shall be kept to be closed and please use a dust mask.
Do not set the paint on fi re. A scraping knife shall be used. Keep the distance between the air outlet and the
paint removing surface to be at least 25mm. If the paint is scraped along a ver cal direc downwards
scrape the paint to prevent the paint from falling into the heat gun and ge
A er comple roughly clean the worksite and safely dispose the removed paint.
SYMBOLS
OPERATING INSTRUCTION
① N ozzle
② Air vents
③ Switch (0/1/2/3)
Cut off the p ow er be fo re the t ool is assembled or adju st ed.
Air temperature can be adjusted to adapt to a wider applica scope. The following table is a reference
for di ff erent applica e
Se Applica
Level II Dry tone test samples, packing, adhesives, cons nts and plaster models.
Dry wet wood.
Remove pasters.
Catalyze adhesives such as contact adhesives on join g planes, ac vate adhering glue,
accelerate the gluing process, melt bonding points and remove or s plas films on edges of
plates.
Wax or dewax. Shrink packages and PVC insula
Melt frozen stairs, door locks, deck lid, car doors and water pipes. Unfreeze frost deposit on
refrigerators and ice boxes.
Do not touch metallic parts to avoid scalding.
Read the manual
Warning Wear dusk mask
Double isula Do not dispose of old appliances in the
household garbage
Wear eye prot Disconnect from power supply while
maintance