13
5. Using the screws that came with the SAU-1900E, place the screws into holes on the
SAU-1900E through the holes in the bracket, and screw in the screws until the
bracket is secure to the SAU-1900E.
Note:
Do not use any other screws other than what is included in your package. If you
lose the screws, however, you may use two M4, self-tapping Phillips head screws of
lengths between 5-8mm, but absolutely no longer than 8mm.
6. Taking the SAU-1900E bracket assembly in hand, insert the supplied short telephone
cable through the small opening in the top of the bracket (between the prongs). Then,
pull the telephone cable through the rectangular opening in the middle of the bracket.
7. Plug the end of the telephone cable that is now placed in the middle opening of the
bracket into the wall plate.
8. Gently pulling up on the free end of the telephone cable, take up the slack of the
cable, and slip the mounting holes of the bracket over the wall plate posts.
9. Slide the SAU-1900E firmly into place by pushing gently down (you will feel the
SAU-1900E stop moving when it is locked into position).
10. Insert the free end of the telephone cable into one of the RJ-11 jacks on the top of the
SAU-1900E.
