20
14. Turn the SAU-1900E upside down onto a soft cloth (this has already been done if you
had a wall-mount installation) and orient the SAU-1900E such that the three semi-
circular/ridged cover release latches are toward you.
15. Remove the battery cover by depressing the semi-circular/ridged cover release latches
while pushing the cover away from you. It should move toward the edge opposite
you. Slide the cover completely out.
16. Remove the battery. This is easily accomplished by holding onto the SAU-1900E
with one hand while still laying on the table, and gently pulling the exposed battery
strap straight up until the battery comes loose from the battery compartment. (If for
some reason the battery strap is not available, is damaged, etc. The battery can also be
removed by turning the SAU-1900E over while holding your hand under the battery
with the battery facing the floor and then gently tapping the edge of the SAU-1900E
onto a tabletop until the battery slides out. Do not drop the battery as this may cause
it to leak acid).
17. Follow the instructions in the section entitled
Battery Installation
, starting with step
#5, to install your new battery.
18. If you had installed your SAU-1900E on a wall, follow the instructions in the section
entitled
Wall-Mount Installation
to reattach the bracket and mount the SAU-1900E to
a wall plate.
19. Follow the instructions in the section entitled
connecting the SAU-1900E to Your
Telephone(s)
to reconnect your SAU-1900E.
20. Properly dispose of the used battery by taking it to a recycling plant.
